background image

 

Inovys II-E 

 

2017-02

 

Page 3 

1 Product 

description 

1.1 Intended 

Use 

The wheelchair is intended for people with walking difficulties or no walking abilities. 

The wheelchair is designed to transport 1 person. 

The wheelchair is suited for indoor and limited outdoor use. 

The user can propel the wheelchair by himself (only for 22", 24" rear wheels) or have the 
wheelchair pushed by an attendant. 

The different types of fittings and accessories, and the modular construction allow full use by 
persons disabled by: 

 paralysis 

  loss of limbs (leg amputation) 

  limb defects or deformations 

  stiff or damaged joints 

  heart insuffiencies and poor blood circulation 

 balance 

disturbances 

 

  cachexia (decrease in muscle) 

  and also for aged persons. 

 

When providing for individual requirements: 

  body size and weight (max. 135 kg) 

  physical and psychological condition 

 residential 

circumstances 

 environment 

should be taken into consideration. 

 

Your wheelchair should only be used on surfaces where all four wheels are touching the 
ground and where there is sufficient contact to propel the wheels equally. 

Ride only over flat surfaces with firm ground. It should not be used to drive on ground such 
as gravel, mud, cobble stones, grassy surfaces, or other ground that is not firm or level. 

The wheelchair should not be used as a ladder, nor is it a transport for heavy or hot objects. 

When used on mats, carpeted floors or loose floor coverings, the floor covering can get 
damaged. 

Use only Vermeiren approved accessories. 

The manufacturer is not liable for damage caused by the lack of or improper service or as a 
result of not following instructions from this manual. 

Compliance with the user and maintenance instructions are an essential part of the 
guarantee conditions. 

 

Summary of Contents for Inovys II-E

































Reviews: