Forest 3
2014-12
Page 28
DISMANTLING
A.
Unscrew and remove the axle nut on the drive wheel and the 4 screws that attach the wheel to
the
flange.
B.
Let the air out of the wheel by lightly pressing the pressure pin on the valve.
C.
Unscrew the 5 screws on the inside of the rim. Separate the rim sides.
ASSEMBLY
Insert the partly-filled inner tube into the tyre.
C.
Connect the two sides of the rim through the tyres and screw them back again.
B.
Put the valve through the hole for it in the rim.
A.
Put the wheel back on the flange and secure these connection with the 4 screws. Afterwards
secure the wheel by hand-tightening the axle nut. Inflate the wheel to the recommended tyre
pressure.
3.6 Changing the battery
L
CAUTION:
Risk of burns - Do not come in contact with the acid from the batteries.
See for a good ventilation of the battery compartment.
The battery shall be changed by trained personel. To change the batteries, send your electric
wheelchair to the specialist dealer.
4 Maintenance
For the maintenance / cleaning instructions refer to the separate maintenance manual of the
electric wheelchairs. Refer for these separate manual to your specialist dealer.
