Forest 3
2014-12
Page 11
2.3.2 Height and angle adjustment armpad
The armpads can be
adjusted in height over a range of 30 mm: stepless (for fine tuning) and angle
over a range of 360 °: steps 7,5°.
1. Loosen the star knob
.
2. Pull / push lightly on the armpad to place the armpad to the desired height or turn to the
armpad to place the armpad in the desired angle.
3. Retighten the star knob
.
2.4 Mounting or removing of the footrests
The wheelchair has two footrests that can be fold away to the "outside" with a 3 point
attachment system (
,
,
on the figure below). This system provides a stady, play-free
connection of the footrest to the seat frame.
The mounting of the footrests is done as
follows:
1. Hold the footrest sideways at the
outside of the wheelchairs frame and
mount the pins
into the holes
.
2. Turn the footrest inwards till the pin
click in the hole of the attachment
point
.
3. Turn the footplates downwards.
To take off the footrests:
1. Fold the footplates upwards.
2. Pull or push on lever
.
3. Turn the footrest to the outside of the
wheelchair until the hole come loose
of the pin from attachment point
.
4. Pull the footrest upwards until the
pins
comes out of the holes
.
