-
-
-
-
6
VERLINDE reserves the right to alter or amend the above information without notice.
02/2010
Always keep the manual close to the machine, available to the operator and to the person
responsible for maintenance.
Make sure that the safety rules are followed (harness, clearance of work area, posting of
instructions to be followed in the work area, etc.).
The trolley can be adapted to all runaway profiles. Couple or hook on the hoist after installation
of the trolley.
CAUTION ! Check the width of the runaway rail and adapt the spacing
of the flanges of the trolley as indicated in the tables
Make sure:
•
That the profile is secured.
•
That the profile is suitable to the loads to be supported.
•
That the dimensions are compatible with the trolley which is to be installed.
•
that the maximal deflection of the profile do not exceed 1/500 of the span under the
dead loads and the SWL.
•
that the longitudinal slope of the track do not exceed 0.3 %.
Carry out:
1 – Disassembly of the trolley
•
Remove the side plate on the counterweight side
•
Position the trolley on the beam
•
Refit the side plate.
•
Check that all the nuts are correctly tightened.
2 – Without disassembly of the trolley
•
Install the trolley on the profile, by the end
•
Fit the travel limit stops (not provided) at the end of the runway.
•
Check that all the nuts are correctly tightened.
