030-300505 Rev. A
92
April 2007
User Guide
VersaLink Wireless Gateway (Model 327W)
14.3.3.2
Adding a Predefined Port Forwarding Service to a Profile
To add a predefined port forwarding service to a profile, in the
New Port Forwarding Rule
screen, perform the
following steps:
1.
Select the desired service from the
Select a Service
drop-down menu. After you have selected a service, it will
appear in the window.
2.
Select the option button that describes how you want the service to be activated.
•
Host:
Allows the unsolicited inbound traffic to a particular PC on the LAN
•
Dynamic:
Enables inbound traffic based on specific outbound traffic
3.
Select the desired IP address from the drop-down menu or manually enter the IP address of the device that you
want to host the service.
4.
Click
Apply
to allow the settings to take effect.
NOTE:
If you click
Cancel
in the
New Port Forwarding Rule
screen, the service you will be displayed; however,
it will not be assigned to a device on the LAN. You must click
Apply
to allow the settings to take effect.