![background image](http://html1.mh-extra.com/html/verizon/um175/um175_user-manual_1005130025.webp)
24
USING QUICKLINK MOBILE
If your expected connection does not appear or if you
connected your wireless phone and cable, or inserted your
UM175 after starting QuickLink Mobile, select “Refresh
Networks” from the “Tools” menu. This will cause QuickLink
Mobile to look for your wireless device(s) and verify network
availability.
@
NOTE:
If you change devices, you will need to run the Setup
Wizard again. To do this make sure that your phone and
cable are connected, then select “Run Wizard” from the
“Tools” menu.
■
CONNECTING
Once your device is properly configured, connecting to the
Internet is as simple as selecting the network connection
type shown in the list and clicking the connect button.
1
Select Alltel Wireless Internet.
2
Click the “Connect” button when it becomes enabled.
Once connected, the “Connect” button will change
to “Disconnect”. Simply click this to end your current
connection. To connect to any other network shown, select
it, and then select “Connect”.
THE STATUS BAR
Information regarding your current network connection can
be seen in the status bar along the bottom of the QuickLink
Mobile interface. For more information on this status
bar, see the section “The Status Bar” in the “Additional
Features” section.
CONNECTING
Summary of Contents for UM175
