Verizon ThingSpace, Device Manual

Page: 7 / 13

Global Asset Tracker
7
Power Save Mode or PSM (Mode 1)
NOTE: The only difference between LED displays for “On” and “PSM” is that status in PSM will only be displayed for 60 seconds
after a short press of the status button
Operational state Power LED Status LED
Standby Any color (Red, Green or Yellow), any
speed blinking Off
Ready (Normal) – PSM active Any color (Red, Green or Yellow), any
speed blinking Any color (Red, Green or Yellow), any
speed blinking
Ready (Normal) – PSM sleep Any color (Red, Green or Yellow), any
speed blinking Yellow or Green, very slow blink or solid
on Green
Charging Any color (Red, Green or Yellow), slow
blink until charged. Solid on when fully
charged Any color (Red, Green or Yellow), any
speed blinking
Firmware Over-The-Air (FOTA)
update Any color (Red, Green or Yellow), fast
blinking Green, fast blinking
Critical device error Red, fast blinking Red, fast blinking
Device not transmitting due to low
battery Red, very slow blink Off
Reset Cycles though all colors (Red, Green,
Yellow) for 2 seconds Cycles though all colors (Red, Green,
Yellow) for 2 seconds
Status Button Press pattern Any color (Red, Green, Yellow), solid on Off