7
You may also follow the steps below to assemble your camera and then
visit the online Setup Wizard to connect your camera.
Step 1: Check the Antenna
a. Ensure the antenna is attached to the Pan and Tilt Camera.
b. Put the antenna in the upright position to improve wireless
reception
Step 2: Visit the Online Portal
a. Visit http://monitoringcontrol.verizon.com and follow the simple
steps provided in the online Setup Wizard. This will enable you
to setup and connect your camera to the Home Control network
* Optional: Mount the Pan and Tilt Camera
*
Note:
The Pan and Tilt Camera can also be placed on a table using
the stand provided.
Note:
Please ensure the Pan and Tilt camera is configured and added
to the network before permanent mounting.
Step 1: Install Mounting Bracket
a. Drill three holes in the ceiling, in the formation shown below,
where you would like to install the Pan and Tilt Camera.