2. Tap
Ok
.
The One Talk desk phone will toggle the Wi-Fi to
On
and search for available wireless
broadband networks in your area.
3. (Optional) To re-search the available network,
tap the Scan soft key.
4. Tap the desired broadband network (SSID) to connect to it.
You can also tap
at the end of the desired SSID, and then tap
Connect
.
5. If the network is secure, enter its password in the
Wi-Fi password field.
6. Tap
Ok
.
Once the connection has been successfully completed, the prompt Connected appears at the
end of the desired SSID.
Note: Contact your network administrator for the Wi-Fi password.
Disabling Wi-Fi feature on the One Talk
desk phone
To disable Wi-Fi feature, do one of the following:
• Tap Menu->
Basic
->
Wi-Fi
.
Mark the
Off
radio box in the Wi-Fi field.
• Connect an Ethernet cable to the One Talk desk phone.
The wireless network is changed to the wired network,
and the One Talk desk phone toggles the Wi-Fi to Off.
• Unplug the Wi-Fi USB dongle from the One Talk desk phone.
The One Talk desk phone toggles the Wi-Fi to Off.
Troubleshooting
Why can’t the One Talk desk phone enable Wi-Fi feature?
• Ensure that the Ethernet cable is removed.
• Ensure that the Wi-Fi USB dongle is not physically damaged.
Why can’t the One Talk desk phone connect to Wi-Fi?
• If the network is secure, ensure that the entered password is correct.
• Ensure that your gateway/router enables the wireless network feature.
• Reboot your gateway/router.
• Turn off the Wi-Fi feature on the One Talk desk phone and then turn it on again.
Why is the wireless signal strength low?
• Ensure that the One Talk desk phone and your gateway/router are within the working range and
there is no obvious interference (walls, doors, etc.) between them.
