53
verizon.com/fios | ©2020 Verizon. All Rights Reserved
• Access the GUI and navigate to the Advanced Settings page.
Select Factory Default option. Click the Restore Default Settings
button. For additional details, refer to the section 4.3/ Factory
Default section of this guide.
Note:
If you reset or reboot your Fios Extender, you may also need
to disconnect your Fios Extender’s power supply for a few minutes
(3 or more) and then reconnect the power cable. However, in order
to provide full synchronization to the coaxial network, disconnecting
and reconnecting the power may be required.
5.0e/
LAN CONNECTION FAILURE
To troubleshoot a LAN connection failure:
• Verify your Fios Extender is properly installed, LAN connections
are correct, and that the Fios Extender and communicating
network devices are all powered on.
• Confirm that the computer and Fios Extender are both on the
same network segment.
If unsure, let the computer get the IP address automatically by
initiating the DHCP function, then verify the computer is using an IP
address within the default range of 192.168.1.2 through 192.168.1.254.
If the computer is not using an IP address within the correct IP
range, it will not connect to your Fios Extender.
• Verify the subnet mask address is set to 255.255.255.0.
Summary of Contents for Fios E3200
Page 1: ...Fios Extender USER GUIDE Model E3200 2020 Verizon...
Page 16: ...02 CONNECTING YOUR Fios Extender 2 0 Setting up Your Fios Extender 2 1 Main Screen...
Page 48: ...05 TROUBLE SHOOTING 5 0 Troubleshooting Tips 5 1 Frequently Asked Questions...
Page 61: ...06 SPECIFICATIONS 6 0 General Specifications 6 1 LED Indicators 6 2 Environmental Parameters...