Verizon FiOS 9100EM User Manual Download Page 87

Page: 87 / 210

030-300554 Rev. A

June 2008

Verizon FiOS Router (Model 9100EM)

User Guide

Configure Connection—WAN PPPoE

To configure the WAN PPPoE properties, click

Configure Connection

in the left submenu of the

WAN PPPoE

Properties

screen. The following screen appears. Enter the desired settings and click

Apply

to save the settings.

PPP—WAN PPPoE

NOTE

: The settings in the screen are provided by Verizon. Do not change the settings unless instructed by Verizon.

To configure the Router’s PPP properties, click

PPP

in the left submenu screen. The following screen appears. If

you change the settings in this screen, click

Apply

to save the settings.

Summary of Contents for FiOS 9100EM



















































































































































































































Search results

Summary of Contents for FiOS 9100EM

Reviews:

Related manuals for FiOS 9100EM

Brands by name

Popular brands

Verizon FiOS 9100EM, User Manual

Search results

Summary of Contents for FiOS 9100EM

Reviews:

Related manuals for FiOS 9100EM

Brands by name

Popular brands