USB727 Modem USER GUIDE
16
How to Use the Clip Holder and USB Cable
The Clip Holder and USB Cable is a safe and convenient method of using the USB727 when solving clearance
issues due to overcrowding in the USB port area of your computer (a common occurrence with notebooks). The
Clip Holder must be used with the USB Cable to comply with FCC RF exposure requirements.
1.
Plug one end of the USB Cable into the Type A USB port on your computer.
2. Insert the USB727 into the Clip Holder. (the USB Connector must be visible through the holder):
3. Plug the wide end of the cable into the USB727 Modem.
4. The device is connected to and powered by the computer as soon as the USB Cable is plugged
properly into the appropriate Type A USB port.
5. Place the USB727 and the Clip Holder on the top of the notebook as shown here.
6.
Launch
VZ
Access Manager and click
Connect
.
1.
Back
Front
