USB727 Modem USER GUIDE
8
Installation and Configuration
This section guides you through the hardware installation and setup process for the USB727 Modem. Before
you begin using your device, read through this Hardware Manual to become familiar with the documentation that
came with your USB727 Modem.
Basics
Follow these steps to begin using your USB727 Modem:
1.
Turn on your computing device and close all applications.
2. Insert
the
VZ
Access Manager CD-ROM into your computer’s CD drive.
3. If
the
VZ
Access Manager CD does not automatically launch, manually launch the VZAccess Manager
CD following the guidelines outlined for manual CD launch per the operating system of your computing
device. Instructions for manual CD launch may be found in the User Guide or Help features of your
computing device.
4. Install
VZ
Access Manager as outlined in the Quick Reference Guide.
5.
Insert the USB727 Modem to install the necessary drivers.
6. Launch
VZ
Access Manager, and click on the
Connect
button. If your device was activated prior to
installation of
VZ
Access Manager and you are in a broadband coverage area, you will be connected to
the Verizon Wireless network. If your device was not activated prior to installation of
VZ
Access
Manager, the software will connect to the Verizon Wireless activation website. Follow the on-screen
instructions to complete the activation. Refer to the
VZ
Access Manager User Guide, located on the
Installation CD for more detailed instructions.
Important:
Installation must be performed within a Broadband
Access
and/or National
Access
coverage area.
Important:
Before installing your new software, delete or uninstall any previously existing modem or dialer
software from your computing system.
Important: VZ
Access Manager must be installed before you plug the USB727 Modem into the computing device
for the first time. Only after the software has been installed can the operating system successfully install and
configure the USB727 Modem
.
