119
SAR INFORMATION
The FCC has granted an Equipment
Authorization for this model phone with all
reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR
information on this model phone is on file with
the FCC and can be found under the Display
Grant section of http://www.fcc.gov/ oet/fccid
after searching on PP4TX-215.
Additional information on Specific Absorption
Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA)
web-site at http://www.wow-com.com.
* In the United States and Canada, the SAR
limit for mobile phones used by the public is
1.6 watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a sub-stantial
margin of safety to give additional protection
for the public and to account for any variations
in measurements.
SAFETY AND
WARRANTY
118
SAR INFORMATION
SAFETY AND
WARRANTY
This is because the phone is designed to operate
at multiple power levels so as to use only the
power required to reach the network. In gener-
al, the closer you are to a wireless base station
antenna, the lower the power output.
Before a phone model is available for sale to
the public, it must be tested and certified to the
FCC that it does not exceed the limit established
by the government adopted requirement for
safe exposure. The tests are performed in posi-
tions and locations (e.g., at the ear and worn
on the body) as required by the FCC for each
model. The highest SAR value for this model
phone when tested for use at the ear is 1.3
W/Kg and when worn on the body, as described
in this user guide, is 0.6W/Kg. (Body-worn
measurements differ among phone models,
depending upon available accessories and FCC
requirements). While there may be differences
between the SAR levels of various phones and
at various positions, they all meet the
government requirement for safe exposure.
The SAR testing for Body-worn operation was
performed with a belt clip that provided a
20mm separation. The User’s Manual indicates
that any holsters/clips used with this device
should contain no metallic components.
070427_PN-310_EN_M_REV01.indd 118-119
070427_PN-310_EN_M_REV01.indd 118-119
2007.5.7 11:13:13 AM
2007.5.7 11:13:13 AM
Summary of Contents for CDM8905
Page 2: ...User Guide CDM8905...