H
CALL WAITING
Notifies you of an incoming call when you are
already on a call by sounding a beep tone and
displaying the caller’s phone number.
To answer another call while on the phone,
press
.
This places the first call on hold. To switch back
to the first caller, press
again.
H
VOLUME ADJUSTMENT
To adjust the volume:
When your phone is not in any menu or
performing any functions, press the side
volume key
up or down.
Select one of the following options, then
press
[OK] to save it.
Press the Side Volume Key
up or down
to adjust Earpiece volume during a call.
BASIC OPERATION
BASIC FUNCTIONS
26
H
WAIT/2-SEC PAUSE
Pauses are used for automated systems (i.e.,
Voicemail, calling cards). Insert a pause after
a phone number then enter another group of
numbers. The second set of numbers is dialed
automatically after the pause. This feature is
useful for dialing into systems that require a
code.
To insert a pause, enter a phone number
then press Right Soft Key [OPTIONS].
Select either a 2-Sec Pause (“P” appears) or
a Wait (“W” appears).
Press
to dial or Left Soft Key [SAVE]
to store.
Please refer to page 32 for more details
about storing a phone number.
H
CALLER ID
Identifies callers by displaying their phone
number. If the caller’s name and number are
already stored in your phone book, the name
will be displayed.
The caller ID information is stored in
Recent Calls.
BASIC FUNCTIONS
BASIC OPERATION
27
All Sounds Off
Alarm Only
Vibrate Only
Low / Med Low / Med / Med High /
High
070427_PN-310_EN_M_REV01.indd 26-27
070427_PN-310_EN_M_REV01.indd 26-27
2007.5.7 11:12:22 AM
2007.5.7 11:12:22 AM
Summary of Contents for CDM8905
Page 2: ...User Guide CDM8905...