Note:
A default user is configured in the system. The default user name is
sysadmin
. The default password is
P@ssw0rd
, where 0 is the number zero.
To access and use the Veritas Remote Management web interface from a
remote computer
1
Log on to a remote computer in the network and open a supported Windows
browser.
2
Enter the remote management (IPMI) port IP address (https://) that is assigned
to the remote management port. The following page appears:
3
Enter your login credentials. The default user name is
sysadmin
. The default
password is
P@ssw0rd
, where
0
is the number zero.
Click
Login
.
4
Click the
Remote Control
section located at the top of the page. The
Remote
Control
section lets you remotely monitor and control the server.
Do
one
of the following to launch the Flex Appliance Shell:
■
If available, navigate to
Remote Control
>
iKVM over HTML5
.
Click
Launch iKVM over HTML5
to launch the Veritas 5150 Appliance
shell. A new window opens that enables you to remotely monitor and control
the appliance.
33
Installation procedures
Accessing and using the Veritas Remote Management interface
