The blade can be positioned on the router plane in any one of four settings.
•
In the front for general work,
•
on the back of the post for bullnose work,
•
on the back and facing left or right for lateral applications.*
*Note:
Applies only to
1
/
2
" blades, not optional smaller blades.
To change the blade location from front to back, loosen the locking knob until
the top of the blade tilts away and disengages from the depth adjustment knob.
Withdraw the blade from the bottom of the plane. Rotate the collar and reinsert the
blade up through the bottom of the plane and collar.
When mounted on the back of the plane, the blade can be reorientated to face left,
right or forward by simply releasing the locking knob and rotating the blade to the
desired position within the collar.
Figure 2: Blade attachment.
Figure 3: Blade orientation.
Depth Adjustment Knob
Locking Knob
Collar
Blade
General
Bullnose
Lateral
Lateral
3
Summary of Contents for 05P38.01
Page 1: ...Router Plane 05P38 01 U S Pat No 7 950 157 ...
Page 7: ...7 ...
