VeriSmart EcoHeat C11, Installation And User Manual

Page: 59 / 68

THERMAL SAFETY
In the case of overheating, a safety device automatically cuts the
radiators operation. After cooling the radiator will automatically
reset.
If the failure persists, the safety cut off would permanently stop
the device.
In this case, an after­sale service authorised by the manufacturer
must check the device. Contact your retailer or installer.
MAINTENANCE
Your radiator requires no regular maintenance, however, to
ensure its good operation:
Clean the exterior case of your radiator using a dry or damp
cloth. Do not use any cleaning products.
Always disconnect the device from the mains before performing
any cleaning or maintenance operation.
Let it cool down before cleaning.
Do not use detergent, solvent, abrasive products or any
other chemical product to clean the radiator.
NEVER immerse the device in water or any other liquids.
You can use a vacuum or flexible brush to clean the air grilles.
This maintenance must be carried out regularly to ensure
optimum performance. Ensure the radiator is totally dry before
turning it back on.
Rev.1_09-07-15 Page 30