Z207933-0A
Page 2 of 5
©2021 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 0321
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
CWE2 Series Installation Guide
Specifications (cont.)
WARRANTY
Limited Warranty
3 years
COMPLIANCE INFORMATION
Agency Approvals
UL 916, European conformance CE:
EN61000-6-2
EN61000-6-3
EN61000 Series - industrial immunity
EN 61326-1
FCC Part 15 Class B, REACH, RoHS, RCM (Australia), ICES-003 (Canada)
* Applicable for CWE2 4-20 mA current mode only. If load parameters are not met, product will reset.
Dimensions
Functions
115
(4.5)
85
(3.3)
24
(0.9)
The CWE2 Series sensor measures CO2 and temperature (if equipped) in a room and provides analog outputs to a controller.
1. Remove the cover from the base at the bottom of the device.
2. Position the sensor base vertically on the wall 1.35 m (4.5 ft.) above the floor with the “UP” arrow facing upward. Locate away
from windows, vents and other sources of draft. If possible, do not mount on an external wall, as this may cause inaccurate
temperature readings.
Installation
