6%2)3).$5342)%3
POWER MONITORING
INSTALLATION GUIDE
Z204062-0E
page 1
©2008 Veris Industries USA 800.354.8556 or 503.598.4564 / [email protected]
06081
H8186-CB
Installer's Specifications
Energy Meter Communications Board
)";"3%0'&-&$53*$4)0$,&91-04*0/03"3$'-"4)
t 'PMMPXTBGFFMFDUSJDBMXPSLQSBDUJDFT
4FF/'1"&JOUIF64"PSBQQMJDBCMFMPDBMDPEFT
t 5IJTFRVJQNFOUNVTUPOMZCFJOTUBMMFEBOETFSWJDFECZRVBMJmFEFMFDUSJDBMQFSTPOOFM
t 3FBEVOEFSTUBOEBOEGPMMPXUIFJOTUSVDUJPOTCFGPSFJOTUBMMJOHUIJTQSPEVDU
t 5VSOPõBMMQPXFSTVQQMZJOHFRVJQNFOUCFGPSFXPSLJOHPOPSJOTJEFUIFFRVJQNFOU
t 6TFBQSPQFSMZSBUFEWPMUBHFTFOTJOHEFWJDFUPDPOmSNQPXFSJTPõ
%0/05%&1&/%0/5)*4130%6$5'0370-5"(&*/%*$"5*0/
t 0OMZJOTUBMMUIJTQSPEVDUPOJOTVMBUFEDPOEVDUPST
'BJMVSFUPGPMMPXUIFTFJOTUSVDUJPOTXJMMSFTVMUJOEFBUIPSTFSJPVTJOKVSZ
%"/(&3
/05*$&
t 5IJTQSPEVDUJTOPUJOUFOEFEGPSMJGFPSTBGFUZBQQMJDBUJPOT
t %POPUJOTUBMMUIJTQSPEVDUJOIB[BSEPVTPSDMBTTJmFEMPDBUJPOT
t 5IFJOTUBMMFSJTSFTQPOTJCMFGPSDPOGPSNBODFUPBMMBQQMJDBCMFDPEFT
t .PVOUUIJTQSPEVDUJOTJEFBTVJUBCMFmSFBOEFMFDUSJDBMFODMPTVSF
'$$1"35*/'03."5*0/
/05&5IJTFRVJQNFOUIBTCFFOUFTUFECZUIFNBOVGBDUVSFSBOEGPVOE
UPDPNQMZXJUIUIFMJNJUTGPSBDMBTT"EJHJUBMEFWJDFQVSTVBOUUPQBSU
PGUIF'$$3VMFT5IFTFMJNJUTBSFEFTJHOFEUPQSPWJEFSFBTPOBCMF
QSPUFDUJPOBHBJOTUIBSNGVMJOUFSGFSFODFXIFOUIFFRVJQNFOUJT
PQFSBUFEJOBDPNNFSDJBMFOWJSPONFOU5IJTFRVJQNFOUHFOFSBUFT
VTFTBOEDBOSBEJBUFSBEJPGSFRVFODZFOFSHZBOEJGOPUJOTUBMMFEBOE
VTFEJOBDDPSEBODFXJUIUIFJOTUSVDUJPONBOVBMNBZDBVTFIBSNGVM
JOUFSGFSFODFUPSBEJPDPNNVOJDBUJPOT0QFSBUJPOPGUIJTFRVJQNFOUJO
BSFTJEFOUJBMBSFBJTMJLFMZUPDBVTFIBSNGVMJOUFSGFSFODFJOXIJDIDBTF
UIFVTFSXJMMCFSFRVJSFEUPDPSSFDUUIFJOUFSGFSFODFBUIJTPXOFYQFOTF
.PEJmDBUJPOTUPUIJTQSPEVDUXJUIPVUUIFFYQSFTTBVUIPSJ[BUJPOPG
7FSJT*OEVTUSJFTOVMMJGZUIJTTUBUFNFOU
Output Type
BACnet
Connection
2-wire or 4-wire, selectable
Baud Rate
9600, 19200, 38400
Parity
None/Odd/Even, Selectable
Address Range
1-63
Dimensions
2” (51mm) x 6” (152mm)
Data Output:
kWh, Consumption
kW, Real power
kVAR, Reactive power
kVA, Apparent power
Power factor
Voltage, line to line
Voltage, line to neutral
Amps, Average current
kW, Real power ØA
kW, Real power ØB
kW, Real power ØC
Power factor ØA
Power factor ØB
Power factor ØC
Voltage, ØA to ØB
Voltage, ØB to ØC
Voltage, ØA to ØC
Voltage, ØA to Neutral
Voltage, ØB to Neutral
Voltage, ØC to Neutral
Amps, Current ØA
Amps, Current ØB
Amps, Current ØC
quick install
1. Turn off all power to the energy meter and the equipment in which it is installed.
2. Discharge static.
3. Slide the H8186-CB into the channels on either side of the energy meter until the
male connection on the meter clicks into place.
4. Insert the communication terminal onto the RS-485 communication terminals.
5. If the demand subinterval feature is used, wire it into the end of the demand
subinterval terminal.
6. Replace the voltage terminal into the energy meter.
H81xxCB Series interfaces are sold as open devices.
Observe handling precautions for static sensitive
devices to avoid damage to the circuitry which
would not be covered under the factory warranty.
MODEL
DESCRIPTION
H8163-CB
Modbus® Communications Board for H8100 Series
H8186-CB
BACnet® Communications Board for H8100 Series
H8126-CB
Metasys® N2 Communications Board for H8100 Series
Product identification
Archived Document
