Z207251-0C
Page 1 of 42
©2020 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 0420
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
Installation Guide
Power Monitoring
TM
DR
AF
T
Product Identification
Number of Meters Supported
Product Overview
The E34 Series Multi-Circuit Meters are designed to measure the current, voltage and energy consumption of up to
14 3-phase circuits with a single board or up to 28 3-phase circuits with a 2-board configuration.
The E34 uses commonly available split-core current sensors with 1/3 V (voltage-mode) outputs to cover a wide
range of loads.
Data is transmitted using an RS-485 Modbus protocol. E34E models also incorporate Ethernet, with support
for BACNet IP, Modbus TCP and SNMP protocols and include BACnet MS/TP serial capability and a sturdy metal
enclosure.
The E34 comes pre-configured for 3-phase loads, but can easily be configured on site to accommodate any
combination of 3-phase, 2-phase and single-phase loads, with or without Neutral current, using the channels
available on the model selected (see table below).
To configure the E34 for operation, use the NetConfig configuration software tool and the E3x Commissioning Guide
on the USB drive provided.
E34 Series
Multi-Circuit Meters
E34
Communication
Option
Number of
3-Phase Meters
A = Modbus RTU only
E = Integrated Ethernet with
Modbus, BACnet & SNMP
04 = 4 (3-phase) meters
08 = 8 (3-phase) meters
14 = 14 (3-phase) meters
28 = 28 (3-phase) meters
E34A
Modbus RTU Only
E34E
Integrated Ethernet
Number of Meters
3-Phase 2-Phase 1-Phase
E34A04
E34E04
4
6
12
E34A08
E34E08
8
12
24
E34A14
E34E14
14
21
42
E34A28
E34E28
28
42
84
E34E
E34A
E212445
