Manual Title:
LD7 Operations Manual
Ref.:
AB-V-MA-00555
Rev No:
A9
Page 21
3.2.2 Enable/ Disable
The L-Band page is also used to view the status of using Veripos corrections (enabled or
disabled for corrections).
To enable, disable or change the active service on the LD7, contact the Veripos Helpdesk
quoting the Vessel SAL (Service Access Licence) number and unit code.
Once Veripos receive the SNF form containing the SAL number and current Unit Code with
your service requirements, the Helpdesk can enable services over the air.
After service changes please allow a few minutes for the control message to be received.
If you have problems please contact the Veripos Helpdesk.
3.2.3 REFERENCE STATION SELECTION
The list of reference stations available for selection is determined by the satellite beam,
selected in
Satellite Beams
selection menu.
To enable
All
reference stations on a data stream (RTCMa or RTCMb) click the All box and
select
Apply
.
To enable a single station or selection of stations uncheck the All box, this provides a list of
available reference stations. Selected reference stations can be ticked and select Apply.
Note:
Please refer to VOSS for a list of Veripos reference stations. This shows the IDs and
indicates which satellites broadcast which station corrections.