Manual Title:
LD7 Operations Manual
Ref.:
AB-V-MA-00555
Rev No:
A9
Page 17
3.
CONFIGURATION
Before starting, connect the antenna(s) and power cables, referring to the information in the
LD7 Installation Manual (AB-V-MA-00559). For guidance on siting of antennas and cabling,
please refer to the
Veripos Antennas and coaxial cabling Guide
(available from VOSS).
An external PC, with an RJ45 LAN port and loaded with the Chrome web browser is
required to configure the unit for operation.
This software is pre-loaded on Veripos PC
’s when issued with the LD7.
LD7 browser software access and updates require a PC with Microsoft Windows XP /
Windows 7 operating system with an RJ45 LAN port, RJ45 cables and (optionally) LAN
hub.
Note: Under instruction from Veripos the unit can be configured using serial ports.
Instructions for using this method can be found in the appendix.
3.1
BROWSER INTERFACE
Use the
LD7’s browser interface to carry out all essential functions when working with the
LD7.
Veripos recommend the
Chrome
browser on a PC to configure the LD7. This is the only
browser supported (Chrome
version 30.0.1559.101
or above).
The default fixed IP address of the LD7 is
192.168.0.126.
3.1.1 Connecting the LD7
Use a Windows 7 /XP PC loaded with Google Chrome browser together with the (supplied)
LD7 RJ45 and USB cable harness that connects to the rear 16 pin USB/Ethernet port.
Connect cables, antennas, etc. and power up the LD7 and PC.
Example
– Windows 7 PC
Amend
the PC’s IP address range to match the LD7:
On the PC, open
Control Panel
.
Select
Networks and Sharing Center
.
On the Left hand side of the screen box, select
Change Adapter Settings
.
Highlight the Local Area connection and right click and select Properties.
Highlight IPV.4 (TCP/IPv4) and select
Properties
.