Veripart VPMVR50, User Manual

Page: 53 / 125

53
4.2 DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on it’s back or side for any length of time during
this process, it must be allowed to reman upright for 6 hours before plugging
it in to avoid damage to the internal components.
1. Remove the plastic hole cover located on the top left side of the
freezer as shown in Fig. 1
2. Remove the upper hinge cover and the upper hinge on the right side
of the freezer, as shown in Fig. 2
3. Remove the door from the lower hinge pin by pulling it gently
upwards. Remove the lower hinge bracket on the right side of the unit
and remove the leveling foot on the left side. Reverse their position as
shown in Fig. 3
4. Reverse the bolt on the lower hinge. Install the lower hinge on the left
side of the freezer. Install the adjustable foot on the right side of the
freezer as shown in Fig. 4
5. Move the door bushing to the left and the plastic hole cover to the
right as shown in Fig. 5
6. Remove the door stop from the lower right side of the freezer door.
Install the door stop on the lower left side of the freezer door as
shown in Fig 6.
7. Install the upper hinge and hinge cover on the left side of the unit.
Place the plastic hole covers in the holes on the right side of the top of
the freezer to cover the screw holes as shown in Fig.7
Note!
•
When installing the door, ensure that the top of the door is level with
the top of the cabinet. If the door is not level, the rubber gasket will
not make a good seal with the cabinet which can cause the appliance
to malfunction.