Verine Fontana Compact BF User Instructions Download Page 3

ABOUT YOUR NEW FONTANA COMPACT BF ROOM HEATER

The Verine Fontana Compact log effect balanced flue room heater incorporates a

unique and highly developed fuel bed which gives the realism of a loose log layout

combined with realistic flames and glow. The use of durable hard ceramic material

in the construction of the fuelbed components ensures long and trouble free

operation.

When first using the new fire a slight smell may be noticed. This is due to small

deposits of oil on the firebox, but will soon disappear

Please take the time to fully read these instructions as you will then be able to

obtain the most effective and safe operation of your fire.

DO NOT UNDER ANY CIRCUMSTANCES ATTEMPT TO USE THIS APPLIANCE

IF THE GLASS PANEL IS BROKEN OR HAS BEEN REMOVED.

IMPORTANT SAFETY INFORMATION

WARNING : This appliance has a hot surface and as with all heating

appliances a fireguard should be used for the protection of children, the

elderly and infirm. Fireguards should conform to B.S. 8423 : 2002

(Fireguards for use with gas heating appliances).

Servicing should be carried out annually by a competent person such as a

GAS SAFE registered engineer. It is a condition of Verine Fires guarantee

schemes that this is carried out by a competent person i.e

a GAS SAFE registered Engineer in accordance with these servicing notes

The service should include visually checking the appliance, flue terminal and

fireplace and inspection of the flue pipe seals, replacing as necessary.

The condition of the ceramic log set should be checked and

if necessary the

whole unit should be replaced with a genuine replacement set.

After any servicing work a gas tightness check must always be carried out.

Any debris or deposits should be removed from the log set from time to time. This

may be carried out by referring to the cleaning section as described later in this

book.

Only the fuelbed components as supplied must be used and complete and

genuine replacements must be used.

Always keep furniture and combustible materials well clear of the fire and never

dry clothing or items either on or near to the fire. Never use aerosols or

flammable cleaning products near to the fire when it is in use.

3

Summary of Contents for Fontana Compact BF














Reviews: