9
2.
To access the bulb, remove the plastic diffuser by pressing the tabs (D) and lifting
out the diffuser.
3.
Firmly hold the bulb base (B) (do not hold the glass portion of the bulb) and turn bulb
in a slight counter-clockwise direction until it releases from the socket.
D
B
Bulb Removal and Replacement — continued
Re-installing Bulb and Plastic Diffuser
1.
To install the bulb, insert bulb into lamp by firmly
holding bulb base and pushing down and rotating
slightly in a clockwise direction to seat properly.
2.
Attach the diffuser to the lamp body by first inserting
the tab located at the bottom of the diffuser (A) into
the opening of the lamp base (B).
3.
Insert one diffuser corner at a time into the side
track and gently down into place into the bottom
track.
4.
Snap side tab into place on side slot. Entire side of
diffuser should be seated into the track. Repeat for
other side of diffuser.
Note:
Alignment of diffuser corner into side track.
5.
Firmly push diffuser down until
Tab A
snaps into place. Align top of diffuser in top
track as necessary.
B
A
Side Tab
Bottom Track
Top Track
Diffuser
Corner
Side Slot
Bottom
Track
Side Track
Tab A
VTCP01-MAN-Rev11.indd 9
3/6/13 10:01 AM
