2
User’s Guide
Inserting and/or changing the Batteries
Your ORBit Relaxation lamp operates on three
AA batteries (not included). To install them:
1.
Hold your ORBit by the top and twist the base
counterclockwise as far as you can – about an
inch (2.5 cm).
2.
Lower the base off the top.
3.
Open the battery compartment on
the underside of the base. Insert
a battery in each compartment
so the polarity (i.e., “+” and “-”)
shown on the battery corresponds
to the one shown in each
compartment: “+” to “+,” “-” to “-.”
Otherwise, the lamp won’t operate.
4.
Close the battery compartment.
5.
Re-connect the base to the top
by repeating steps one and two
above in reverse order and by
twisting the base clockwise.
6.
Get ready to relax!
BATTERY A
1.5V SIZE AA
1.5V SIZE AA
1.5V SIZE AA
BATTERY B
BATTERY C
Insert each battery as shown here
and in each battery compartment.
BATTERY
COMPARTMENT A
BATTERY
COMPARTMENT C
BATTERY
COMPARTMENT B
Opening Tab
Summary of Contents for ORBit VB10
Page 1: ...Relaxation Lamp Model VB10...
