8
9
• This lamp is not for use with light dimmers, timers, motion detectors, or
voltage transformers.
• Use a quality surge suppressor on all electronic equipment. Voltage variations
and spikes can damage electronic components in any system. A quality
suppressor can eliminate the vast majority of failures attributed to surges.
Suppressors may be purchased at electronics stores.
SAVE THESE INSTRUCTIONS
Important Safeguards
•
continued
1) Setup - Plug In
• Place lamp on a flat, level surface.
• Insert power adapter plug into the adapter socket-as
shown on rear of the lamp.
• Plug adapter into a standard 120 VAC electrical outlet.
• Turn on the lamp with the power button located on the top
of the lamp. The button will click as you press down.
2) Take Device Pretest
Before you begin using your HappyLight
®
Alba, please take
the Device Pretest on page 19 and read through the
manual for helpful information and safety precautions.
Setup and Take Device Pretest
On/Off
Power
adapter
plug
VT52_MAN_Rev2.indd 8-9
VT52_MAN_Rev2.indd 8-9
9/10/20 8:36 PM
9/10/20 8:36 PM
