D
EVICE
S
ETUP
Initial Battery Charging
T650T I
NSTALLATION
G
UIDE
17
Figure 6
SAM Insertion
To replace SIM/SAM card, gently slide out the old SIM/SAM card before
inserting a new one.
Initial Battery
Charging
After unpacking your T650T device, connect the power pack to the unit for eight
hours or until fully charged.
The battery has a safety circuit to protect the Li-ion cells from overcharging and
over-discharging. If the battery is over-discharged, the safety circuit shuts down
the battery. The battery must then be recharged to restore operation.
Starting Up and
Shutting Down
The T650T device starts up differently depending on how it is powered ON.
•
The device starts up automatically when the T650T is connected to a non-
battery power source, regardless of the battery charge state.
•
To manually power up, hold the green key down for about 4 seconds until the
device displays the startup screen.
The device lights up once the power is on.
4G SIM
TF / uSD
NOTE
Position the card’s gold contacts facing downward towards the user. The card
slot in the device has a set of contacts. The SAM card has a notch on one corner
to ensure that it fits into the connector base in only one way.
NOTE
The 4-second power-up delay prevents device startup if the green key is
accidentally held down. The time required to hold the green key down to power
up the device is configurable.
NOTE
The Verifone copyright screen starts and displays a unique copyright screen. If
the terminal comes pre-loaded with an application, this starts after the initial
Verifone copyright screen and usually displays its own copyright screen.