VeriFone ruby2, Installation Manual

Page: 10 / 24

Ruby2 Hardware Installation Guide
2 October 01, 2013
Requirements
Note:
The Commander Site Controller and Ruby2 workstation must be
installed by a VeriFone Authorized Service Contractor (VASC).
Software
■
Commander Site Controller Software Suite
Hardware
■
Commander Site Controller (The Commander Site Controller may
also be used to install the Ruby2.)
■
Ruby2 Workstation and Thermal Receipt Printer
■
An intranet infrastructure, or Cable/DSL Ethernet router, or
network. The number of workstations determines the number of
network switch ports required.
Cables
■
Ethernet cable from each Ruby2 to the network switch and/or
router
■
If a network switch is used, an additional Ethernet cable to the
router
■
RS-232 cable between peripherals, such as printers
■
Null Modem Adapter
Recommended Equipment
■
Uninterruptible Power Supply (UPS) - VeriFone recommends that
the Ruby2 be connected to a UPS with a rating of 200VA or greater.
■
Customer Display Pole
■
Cash Drawer
■
PINpad
■
Scanner
■
Printer