12
MX 800 S
ERIES
I
NSTALLATION
G
UIDE
3
Route the multiport cable through the races in the countertop wedge or
through the races underneath the wedge.
Figure 4
Installing the Countertop Wedge
.
Installing I/O
Modules
Use the following steps to install optional I/O modules:
1
Loosen the module retaining screw on the bottom of the terminal (
Figure 5
)
until the old module can slide out.
Figure 5
Removing the old I/O Module
NOTE
The retaining screws are
captive
, which means they do not actually separate
from their seats, but only from the mounting hole.
