S
ETUP
K250 Installation Safety Instructions
14
K250 I
NSTALLATION
G
UIDE
•
the product malfunctions
•
the product is dropped
•
the product is damaged
Floor Mounting- Pedestal Option
1
Please ensure to install K250 unit on a suitable hard, stable floor or surface.
2
K250 unit must be secured to the surface with provided anchor bolts or other
suitable anchors for its intended use. Notify Verifone if you have questions
about your floor or mounting hardware.
Disconnecting the Device
•
For pluggable equipment, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
•
Use team lift principles to lift the kiosk, as weight of combined pedestal and
cabinet section could be dangerous to maneuver for one person.
Hazard Limitation
It is recommended to periodically inspect the product and its fixing points to
ensure that safety is maintained.
Field Wiring
•
Use only a three-wire, grounded NEMA outlet in accordance with the National
Electrical Code (NEC).
•
All field wirings are in accordance with the (NEC) - National Electrical Code.
LCD
The response time, brightness and colors of K250 unit may be affected by the
ambient temperature.
1
Tiny spots (dark or luminescent) may appear on the display due to the liquid
crystal characteristics.
2
There are variations in brightness and colors on each unit.
Periodic Inspection
Periodically inspect the kiosk for possible tampering. Signs of tampering include:
•
Wires protruding out of the device.
•
Foreign objects inserted into the smart card slot or magnetic stripe slot.
•
Any bumps in the casing below the mag stripe slot and any noticeable
additional mag stripe head from the side.
•
Signs of damage to the tamper-evident labels.
•
A Tamper Warning message on the device display.
