VeriFone e315, Installation Manual, Page: 21 / 36

D
EVICE
S
ETUP
Understanding LED Color Behavior
E
315 I
NSTALLATION
G
UIDE
21
Connecting the
Gang Charger to a
Computer
Use a standard USB Type A to Type B cable to connect the Gang Charger to a
computer. When connected, you can individually access each e315 device in the
Gang Charger.
To connect the Gang
Charger to a
computer
1
Insert the USB Type A plug to the computer’s USB port.
2
Insert the other end of the cable to the IN port on the Gang Charger.
Figure 11 Connecting the Gang Charger to a Computer
Understanding
LED Color
Behavior
The following table shows the behavior of the LEDs during various system power
states.
0
#
1
QZ.
2 ABC
3
DEF
5
JKL
6
MNO
4
GHI
7
PRS
8
TUV
9 WXY
*
’” Clear l
Enter
Sleep
Battery
Low
Battery
Extremely
Low
Battery
Charging
Charging
Timer
Fault
Normal
Operation
LED Behavior
Y Green, blinks every 4 seconds
Y Red, 1Hz rate, 50% duty cycle
(Battery low condition: battery
voltage <3.7V)
Y Red, 4Hz rate, 50% duty cycle
(Battery extremely low condition:
battery voltage <3.6V)
Y Orange, 1Hz rate, 50% duty cycle
Y Orange, on continuously
Y Green, on continuously
LEDs are turned OFF when
charging the e315 on a gang
charger