VeriFone e315, Installation Manual, Page: 16 / 36

D
EVICE
S
ETUP
Installing/Replacing an MSAM Card
16
E
315 I
NSTALLATION
G
UIDE
Installing/
Replacing an
MSAM Card
When you first receive your e315, you may need to install an MSAM card or you
may need to replace an old card.
To install/replace
MSAM
1
Unplug any cables or chargers from the e315.
2
Remove the screw from the top cover to display the MSAM compartment.
3
Unlock the MSAM compartment by pulling the locking tab downwards.
4
Hook your finger under locking tab and lift up to swivel the MSAM tray open.
5
Place the MSAM card on top of the tray with the gold contacts facing down
and then gently push down the tray to close.
6
Push the locking tab upwards to lock the tray and secure the MSAM card.
7
Place the cover back and tighten the screw.
Figure 4 Inserting an MSAM Card
CAUTION
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.
NOTE
Not all applications require the use of an MSAM card.
NOTE
Make sure that the MSAM card sits firmly on the tray to be able to close the MSAM
compartment.
# " !