VeriFone DUET Vx810, Reference Manual

Page: 54 / 162

S
YSTEM
M
ODE
System Mode Menus
54
V X 810 R
EFERENCE
G
UIDE
SYS MODE TERM INFO
CERT 234000
HEAP 772
STACK 1708
NEXT CERT F3
©
•
CERT indicates the certificate numbers
pertaining to the device. Pressing
NEXT CERT
(F3)
will show the other certificate numbers.
•
HEAP indicates the memory designation used by
the OS.
•
STACK indicates the memory set aside by the OS
for running tasks.
TERMINAL INFO
X
DIAGS AND LOGS
SYS MODE MENU 2
MEMORY FUNCTIONS F2
TERMINAL INFO F3
CLOCK F4
© ª
To view device configuration information, select
TERMINAL INFO (F3)
.
To abort any action at any step, press
CANCEL
.
SYS MODE MENU
SYSTEM INFO F2
DIAGS AND LOGS F3
To perform system diagnostic tests and view log
information, select
DIAGS AND LOGS (F3)
.
SYS MODE DIAGS
PRINTER DIAG F2
KEYBOARD DIAG F3
MAG CARD DIAG F4
ª
To run a test on the installed printer, select
PRINTER
DIAG (F2)
.
To run a test on the keypad, select
KEYBOARD DIAG
(F3)
.
To run a test on the magnetic stripe reader (MSR),
select
MAG CARD DIAG (F4)
.
SYS MODE DIAGS
SCREEN DIAG F2
IPP DIAG F3
SMART CARD DIAG F4
© ª
To perform a diagnostic test on the screen, select
SCREEN DIAG (F2)
.
To perform a diagnostic test on the internal PIN pad,
select
IPP DIAG (F3)
.
To run a test on any inserted ICC or SAM cards,
select
SMART CARD DIAG (F2)
.
SYS MODE DIAGS
REMOTE DIAGS F2
DEBUGGER F3
HASH F4
© ª
The
REMOTE DIAGS (F2)
functions are reserved for
VeriFone use only.
To use the debugging tool, select
DEBUGGER (F3)
.
To use the hash tool, select HASH (F4). The hash
tool is used for verifying the OS binary image.
Table 9 System Mode Menu 2
(continued)
Display Action