VeriFone DUET Vx810, Reference Manual

Page: 32 / 162

S
ETUP
Power Supply
32
V X 810 R
EFERENCE
G
UIDE
Ethernet
Connection with
External Power
Brick
This cable option has a junction box that provides a standard RJ-45 LAN socket
and a DC jack. However, since most hosts do not support peer-to-peer LAN
connection to a PIN pad, an additional RJ-45 socket is provided on the junction
box to allow a direct connection between V
x
810 and the host.
Figure 21 Ethernet Connection with External Power Brick
Power Supply
Not all V
x
810 configurations and device contexts require use of a power supply.
However, VeriFone ships power supplies with those that require them.
If you have changed the context in which the V
x
810 must work or have questions
about whether a power supply should be used, contact your VeriFone
representative.
Before connecting a power supply, disconnect the power pack cord from the
power outlet.
Make all V
x
810 and device ECR or PC connections before connecting the power
pack cord into a wall outlet or surge protector.
When the V
x
810 has power and an application is loaded, the application starts
after the initial VeriFone copyright screen and displays a unique copyright screen.
If no application is loaded,
DOWNLOAD NEEDED
appears on the display after the
initial VeriFone copyright screen.
CAUTION
Using an incorrectly rated power supply can damage the device or cause it not to
work properly.
WARNING
Do not plug the power pack into an outdoor outlet or operate the device outdoors.
Also, disconnecting power during a transaction can cause transaction data files
not yet stored in memory to be lost.
NOTE
To protect against possible damage caused by lightning strikes and electrical
surges, VeriFone recommends installing a power surge protector.