VERIDT INC · Middleton, WI 53562
1 7
www.veridt.com
2022
• T E C H N I C A L N O T E •
Verify Identify
7. From the list of options in the left pane, select
Network; then click the Configuration button. The IP address of
the EWAC module should display.
8. If the IP address is incorrect, turn off
BOOTP Client and the DHCP Check and enter the correct static IP
address.
9. Next select the
Tunnel option, click the button on the Tunnel 1 Connect Mode window
10. Select the
Host 1 IP address and change it to the IP address of the HID pivCLASS PACS Administration
Figure 9 • IP for Host Address
Figure 10 • Lantroix Device Installer Opening Window
#121
Installation Guide
Stealth Readers
