6
Veria Quickmat is a 2-conductor heating mat which, due to the low fitting height
(approx. 3,8 mm), is particularly suitable for renovating existing floors.
Your underlay/under-floor will decide how big an output your Veria Quickmat should
have. Follow the instructions in the table below.
Note that the heating mat must be connected to the power supply by an authorised
electrician.
Product specifications – Veria Quickmat 100/150 W/m²
Voltage:
230 V
W x L:
See Label
Max. temperature:
120 ˚C
Certified by:
Semko
Areas of application
Max. output per m²
Max.surface
temperature
Thermostat
Wooden floor underlay with carpet, vinyl
or parquet on top
100W/m
2
27˚C
Thermostat with floor sensor and max.
temp. 35 degrees
Wooden floor underlay with tiles on top
100W/m
2
27˚C
Thermostat with floor sensor and max.
temp. 35 degrees
Concrete floors with carpet, vinyl or
parquet on top
100W/m
2
27˚C
Thermostat with floor sensor and max.
temp. 35 degrees
Concrete floors with tiles on top
150W/m
2
None
Thermostat with floor sensor and max.
temp. 45 degrees
Note that the yellow cable must not be cut under any circumstances.
The heating mat/cable must never be double-laid, overlap or cross over itself.
The product must be used to heat the floor directly.
The heating mat must be embedded.
Connection:
Phase:
Neutral:
Earth:
