41
DEFAULT SETTING
1
S y s t é m
Language
English
Device-ID
The Device ID is an important configuration of the equipment in the system. It must be configured
correctly,Otherwise it will not work properly. If the current device is connected to the Outdoor unit1, it must be set
to 1, and the others Slave monitors must be set 2/3/4/5/6 then work normally.
PAL
AHD1080
PAL
AHD1080
PAL
AHD1080
PAL
AHD1080
Input setting
Door1 Signal mode
Door1 Signal type
Door2 Signal mode
Door2 Signal type
Camera1 Signal mode
Camera1 Signal type
Camera2 Signal mode
Camera2 Signal type
Quick setup
Note:
The input video signal must be accurate, otherwise the video signal will not be displayed correctly. If you cannot
accurately know the resolution and format of the input signal, you can use the automatic detection function.
Follow the following instructions when configuring.
EZ Mode
Unconnected
44:01:bb:xx:xx:xx
*CVBFX02***
Network Setting
Netpairing Mode
Cloud services
IP address
MAC
UUID
EN
Summary of Contents for 3001-W
Page 64: ...63 2021 SAFE HOME europe s r o...
