Veria 3001-W, Manual

Page: 40 / 64

39
Wi-Fi Colour Video Doorphone Set
&
Please read the instructions carefully before use
WARNING
• Do not use multiple extension cables to power the device. Failure to do so may generate elevated
temperatures and a fire hazard.
• Do not place or place heavy objects on the device.
• Do not use water or chemicals to clean dirt from the outside of the device. Always use a dry cloth to prevent
mechanical damage and electric shock.
• Do not bend or disconnect the power cable from the mains by force. If it is damaged, there is a risk of fire or
electric shock.
• Do not connect the device to other devices or it may be permanently damaged.
• Do not connect the power cord to the power outlet with wet or damp hands, as there is a risk of electric
shock.
• Do not install the device in a humid environment. Failure to observe the prescribed operating conditions may
result in fires, electric shock or permanent damage to the equipment.
• Do not disassemble, repair or modify the equipment yourself. Doing so may result in fire, electric shock or
permanent damage.
NOTICE
• Ensure that dust or other solid particles and dirt do not accumulate on the surface of the device.
• Install the device on a flat and stable surface.
• Do not install the device in places exposed to direct sunlight or near heat sources.
• If you do not use the device for a long period of time, disconnect it from the power source.
PACKAGING CONTENT
Monitor VERIA S3001W...1pc
Input station VERIA 301...1pc
Power adapter...1pc
Angle clamp...1pc
RFID keychain...5pcs
Mounting material
Description of monitor connectors
UNLOCK - voltage-free output
DC-IN - 12 V - 15 V power supply
DOOR1 - input station 1
DOOR2 - input station 2
CAM1- input camera 1
CAM2 - input camera 2
IN - monitor input
OUT - monitor output
Connector for door station
① - red - 12 V (VCC)
② - white - audio
③ - black - GND
④ - yellow - video
Picture
Ⓐ
Lock control
⑤ - light blue - NC
⑥ - blue - COM
⑦ - blue/black - NO
⑧ - black - GND
⑨ - purple - +12 V for lock
⑩ - brown - EXIT button
Picture
Ⓑ
Door station
⑪ - control of the EXIT button opening time
⑫ - volume control
⑬ - add/remove RFID
⑭ - display switching (1080P/720P/CVBS)
⑮ - name tag
NOTE:
If it is AHD call panel must be use AHD indoor monitor to correctly decode, otherwise no image display.
If use the exit button function, the indoor monitor when standby state must have 5 V power supply.
The input station allows switching according to the monitor used. To switch to the desired display, press switch 14
for 5 seconds.
Changing the time of the EXIT button is possible in the range of 2 - 10 seconds.
EN