Verhagen Leiden B.V.
|
Hoge Rijndijk 267
|
2314 AG Leiden
|
T: +31 (0)71 581 30 30
|
F: +31(0)71 541 61 89
11
www.verhagenleiden.nl
6.3
Stop
Procedure:
1. Take your foot off the accelerator pedal.
2. Brake with the brake pedal until the V-move 650 is stationary in a safe place.
3.
Take your left foot off the “Floor switch for driver detection”.
4. Release the brake pedal and check that the V-move 650 remains at a standstill.
5. Switch the ignition off.
6. When you leave the V-move 650 always remove the ignition keys.
If the V-move 650 is not to be used for a certain period, you must:
Connect the battery charger or have the batteries recharged at least every 3 months.
6.4
Emergency stop
There is an emergency stop button on the dashboard (figure 2, position 3).
Procedure:
1. Press the emergency stop button if there is a possible danger. The emergency stop
disconnects the batteries so the electrical system is no longer powered. The V-move 650 will
then slow down and stop.
After the emergency stop situation has been resolved the V-move 650 can be started up again.
Procedure:
1. Pull out the emergency stop button.
6.5
Changing the battery
Batteries of the V-move 650 are interchangeable.
Procedure:
1. Switch the machine off.
2. Remove any connected charging plug (figure 4, position 1) from
the machine.
3. Open the door for access to the battery (figure 1, position 7).
4. Take the plug out (1).
5. Unlock locking device (2).
6. Slide the battery pack (3) out.
7. Change the battery pack (3).
8. Slide the battery pack (3) in.
9. Lock locking device (2).
10. Insert plug (1).
11. Close the door for access to the battery (figure 1, position 7).
1
2
Figure 3
3
