VERDER CARBOLITE GERO HTF 18/15 Installation, Operation And Maintenance Instructions Download Page 6

Page: 6 / 62

1.0 Symbols and Warnings

1.0

Symbols and Warnings

1.1

Switches and Lights

Instrument switch: when the instrument switch is operated the
temperature control circuit is energised.

Heat light: the adjacent light glows or flashes to indicate that power
is being supplied to the elements.

1.2

General Warnings

DANGER – Electric shock. Read any warning printed next to this
symbol.

WARNING: Risk of fatal injury.

DANGER – Hot surface. Read any warning printed next to this
symbol.

WARNING: All surfaces of a product may be hot.

DANGER – Read any warning printed next to this symbol.

Caution – Double Pole/Neutral Fusing

Summary of Contents for CARBOLITE GERO HTF 18/15































































Search results

Summary of Contents for CARBOLITE GERO HTF 18/15

Reviews:

Related manuals for CARBOLITE GERO HTF 18/15

Brands by name

Popular brands

VERDER CARBOLITE GERO HTF 18/15, Installation, Operation And Maintenance Instructions

Search results

Summary of Contents for CARBOLITE GERO HTF 18/15

Reviews:

Related manuals for CARBOLITE GERO HTF 18/15

Brands by name

Popular brands