10.2 Power Settings
The power limit settings (OP.Hi) for this model is as follows. The figures represent the
maximum percentage of time that controlled power is supplied to the elements. Do not
attempt to "improve performance" by setting a value higher than the one from the
table. To adjust the parameter refer to the "Changing the Maximum Output Power" of
the control section of the manual.
All standard models covered by this manual are fitted with elements designed for use
over the range of voltages 100 V-120 V and 200 V-240 V; the power limit parameter is
set according to the table below.
The power limit depends on the voltages follows:
Voltage
100 V
120 V
200 V
208 V
220 V
230 V
240 V
Percentage (%)
-
-
100
100
89
82
77
Please refer to the rating label for product specific information.
47
10.0 Fuses and Power Settings
