27
26
The Members screen presents a list of the selected group’s assigned members in the
box on the left. The users listed in the right box are not currently members of the group.
By selecting user names and pressing either the
Add
or
Remove
button you can reassign
various users to the group. When done with your assignments, press
Save
to save your
changes.
Note that if you are using the Group Management dialogue to create a new group, there
may be other properties that you want to set for this group. For example, after creating a
new group through Advanced / Group Management, share access for that group can be
set by leaving Group Management and going to File and Print / Share Management. This
dialogue is explained later in this reference section.
File and Print
This group of settings allows for naming the Windows Workgroup, enabling certain server
protocols (such as FTP, NFS, and print server), as well as providing full control over the
creation and management of folders (shares) on the drive.
File Server
Enter the main screen of File Server Setting by selecting Advanced / File and Print / File
Server. This screen presents options for Windows Workgroup and Windows Internet
Naming Service (WINS), for enabling File Transfer Protocol (FTP), and Network File
System (NFS) server.
Each subgroup of settings is described below. After completing the form you must press
Save
to save your changes.
Windows Setting
With these settings you can enable or disable the NETBEUI transport protocol, which
is required for SMB/CIFS file sharing in Windows. For example, for shared folders to be
visible in “My Network Places”, this protocol needs to be running. It is enabled by default.
When Windows Setting is enabled, you can modify the Windows Workgroup name and
