1779-160404(2)
Drukfouten, fouten en technische wijzigingen voorbehouden.
INSTALLATION MANUAL
VERANDA V950 - LUGANO
10361814-191125EN
3
Subject to misprints, errors and technical modifications.
•
Drill 2 holes into the wall profile at the height of every
beam. Drill on the drill line. Use a metal drill Ø 8 mm.
•
Place the compri tape in the recess of the wall profile.
1.
Installation of the wall profile
Compriband
Kitrand
Muur
46 mm
65 mm
3x
1
2
3
4
•
Mark a line on the wall that indicates the location of the lower side of the wall profile. Place the wall profile on the line
and mark the holes as they are pre-drilled in the wall profile.
•
Drill the holes with a concrete drill 8 mm. Make sure that the wall profile is level.
•
Install the wall profile. Screws, plugs and rings are not included in the delivery. Use at least a 8 mm plug and M8 screw
to install the wall profile completely.
•
Seal the complete edge of the wall profile at the top.
•
Slide the beam connections, three pieces per beam, into
the wall profile.
•
Install the end cap to the wall profile. Only do this at the
engine side!
Boorlijn
Compriband
80 mm
20 mm
Compri tape
Compri tape
Wall
Seal
Drill line
