Inclusion/Exclusion for Devices using a Generic Device Wizard
After adding a new device, the VeraSecure Controller will ask you to name it and choose the room it is (or will be) located in.
Note:
If the device was previously included with a different Z-Wave system, you’ll need to it exclude it before adding with your VeraSecure.(You may also
need to do this if you have problems Inclusion/Exclusion the first time.) Press the Retry button to start the exclusion
process. Once the device is excluded, add it by following the inclusion steps.
Select
Devices
and click on the
Add Device
option.
Click on the
“+”
sign for the Other
Device’s category. A list of Vera Custom
Device Wizards is displayed. If your specific
device is not shown, select the
“Generic
Z-Wave Device”
option.
Follow the steps in the Device Wizard
to add the device.
Step 1
Step 2
Step 3
Summary of Contents for VeraSecure
Page 1: ...VeraSecure Advanced Smart Home Security Controller ...
Page 13: ...GSG VERASECURE100 V1 ...
Page 14: ...Z Wave Overview VeraSecure ...
Page 22: ......
