APRS 51WG5
IGATE/DIGI/TRACK/GPS/BD//BLUETOOTH/WIFI
/
USB/4G
Venus
This machine has built-in 2.0+4.0 dual-mode Bluetooth settings, pairing password 1234, and the Bluetooth name is
the same as the call sign of this device.
OUT 1 Bluetooth data output 1, 9600 rate
KISS HEX output standard KISS data commands, used in various standard APRS PC software
For example: Liuyun Android version, Liuyun PC version, APRSdroid, YAAC, etc.
UI output standard UI text data, used to upload server, or user secondary development
GPWPL output standard GPWPL waypoint data, user smart navigator, APRSdroid, Aowei, LOCUS MAP, etc.
KISS ASC output standard KISS ASC data commands for secondary development by users
GS232B outputs standard GS-232B format data commands for G5500 rotator control
OFF Turn off output data
OUT 2 Bluetooth data output 2, 9600 rate
GPS outputs GPS data (GNRMC+GNGGA), which can be mixed and output with OUT 1 at the same time.
OFF Turn off GPS output
Bluetooth power switch
ON/OFF
APRS digital relay DIGI function
2 repeater names can be set
Repeater name 1: Default WIDE1 numbers or English capitals, up to 6 digits
Repeater name 2: Default WIDE2 numbers or English capitals, up to 6 digits
Forwarding condition: When the machine receives a valid beacon,
And the beacon contains the local relay name, and the number of forwarding is greater than 1,
This machine will forward once, and reset the number of forwarding times, reduce it once, and re-pack and send.
If the number of retransmissions in the beacon is 0, no retransmission is performed.
APRS digital relay is a process of receiving, decoding, re-encoding, and sending each time it is forwarded. Therefore,
no matter how many times it is forwarded, the signal quality will always be the best, which is different from traditional
analog voice relay.
APRS digital relay, because the beacon contains the specified number of retransmissions, it will not be
