APRS 51WG5
IGATE/DIGI/TRACK/GPS/BD//BLUETOOTH/WIFI
/
USB/4G
Venus
GPS power saving
When it is manually pressed or the time is reached, the GPS will be turned on automatically, and the GPS will be
hot-started, and the positioning will be performed within a few seconds, and then the transmitter will be transmitted
and the GPS will be turned off again.
Note: Only manual mode or timing mode is valid.
PATH 1, PATH 2
The relay forwarding and forwarding times with the name WIDE1 or WIDE2 are required.
Default setting: WIDE1-1 WIDE2-0, which means that the relay named WIDE1 is required to be forwarded once, and
WIDE2 is not required to be forwarded.
MIC-E
The beacon data is compressed and transmitted, which effectively shortens the transmission time, reduces the
probability of data being interfered by other signals in the air, and improves the decoding success rate of the receiver.
PTT delay
Before transmitting the signal, the PTT trigger delay, when the other party's SQL response is slow, you can increase the
PTT delay parameter.
Icon 1:
! Represents the data type character, a fixed length of 1 word, generally do not need to be changed. If you need to
modify, refer to the APRS protocol manual
/ Represents the icon set, generally do not need to be changed. If you need to modify, refer to the APRS protocol
manual.
> Indicates the icon style displayed on the server map, with a fixed length of 1 word. Refer to "APRS Icon Set" to change
it.
Automatic icon 2:
Only valid in smart mode.
Three parameters: waiting time, 2nd icon and 2nd icon set.
180 waiting time, in seconds
/ Indicates the second icon set
P represents the second icon
