S
444Ķ3
enuelightinge
ff
" 10Ķ ,*
č
IR Remote Controls
OFF
: Turns Tetra Beam off
ON
: Turns Tetra Beam on
AUTO
: Sets patterns to cycle automatically at a rate controlled by the
SPEED+/SPEED- controls
SOUND
: Sets pattern changes based on input from the MIC (#3 on the
rear panel)
STROBE
:
Turns the strobe effect on or off. When STROBE is on, SPEED+
and SPEED- controls control the strobe pulsing speed
SPEED-
: Decreases the speed of the strobe pulsing when in STROBE
mode, and decreases the speed of the pattern changes when in AUTO
mode
SPEED+
: Increases the speed of the strobe pulsing when in STROBE
mode, and
i
ncreases the speed of the pattern changes when in AUTO
mode
COLOR
: Puts Tetra Beam in manual color mode, where R1-R4, G1-G4 and
B1-B4 buttons can be used to control colors for each individual beam
.
When in color mode, pressing the COLOR button will clear all active LEDs
R1-R4
: Turns red LEDs on or off for the associated beam
G1-G4
: Turns green LEDs on or off for the associated beam
B1-B4
: Turns blue LEDs on or off for the associated beam