7
www.venuelightingeffects.com
SETUP
This fixture runs on 100~240 VAC, 50/60 Hz. Before powering on the unit, make sure the line voltage is
within the range of accepted voltages.
To determine the power requirements for a particular fixture, see the label affixed to the bottom of the
fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating indicates its average
current draw under normal conditions.
AC Power
Always connect the fixture to a switched circuit. Never connect the fixture to a rheostat
(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used only
as a 0 to 100% switch.
Always connect the fixture to a circuit with a suitable electrical ground.
Back Panel
